Anchor tension equipment
For trial, control and approval anchor tests CCT produces hollow hydraulic Jacks. Also it could be usead for strand anchors tension.For structural monitoring we have developed Atlant load cells.
Jack 100/150
- Max load 1000 kN
- Max stroke 150 мм
- Piston area 180,02 sqr.сm
- Dimensions 360х255х360 mm
- Weight 50 kg
Jack 200/100
- Max load 2000 kN
- Max stroke 100 мм
- Piston area 358,14 sqr.сm
- Dimensions 320х295х370 mm
- Weight 69 kg
Jack 250/100
- Max load 2500 kN
- Max stroke 100 мм
- Piston area 552,92 sqr.сm
- Dimensions 337х295х440 mm
- Weight 125 kg
Jack 2E powerpacks are designed to workig with hydraulic Jacks.
- Max pressure 65 MPa
- Capacity 1,3 l/min
- Power consumption 2,2 kW
- Hydraulic tank capacity 50 l
- Dimensions 1095х685х1035 mm
- Weight (full) 150 (190) kg
Anchor load monitoring in retaining constructions are provided by hydraulic load cells Atlant. They are consist of two ring-shaped stainless steel plates welded together. The anular space between the plates is filled under vacuum by deaired oil. The load is directly measured by manometer connected to the cell body.
- Measurement range 105-1000 kN (4-38 MPa)
- Operating temperature -30...+60 С
- Dimensions 490х228х57 mm
- Weight 6,8 kg
KEY POINT
Ground anchors tension and testiong is an integral part of the facility delivery.
Jack equipment and Atlant anchor sensors are certified and meet all requirements of controlling organizations.
